Verification: a4dcc4e340d77499
top of page
Search

Window Film for Older and Historic Homes in Norfolk: Keep the Original Glass, Lose the Heat, Glare and UV

2 days ago
11 min read
Historic homes in Norfolk, VA, featuring tinted original windows for heat, glare, and UV protection by Commonwealth Window Tinting. Window Film for Older and Historic Homes in Norfolk: Keep the Original Glass, Lose the Heat, Glare and UV

Window Film for Older and Historic Homes in Norfolk

Drive through Ghent, Larchmont, Colonial Place, Park Place or the streets around Freemason and you will see some of the best old windows in Hampton Roads. Tall double-hung sashes, divided lites, transoms over front doors, leaded sidelights, sunrooms wrapped in glass and the faint ripple of old cylinder glass that catches the light differently from anything made today. Those windows are a big part of why people fall in love with Norfolk's older homes. They are also a big part of why those homes can be hot in July, glary on a winter afternoon and hard on rugs, floors and furniture year round.


Owners of older homes usually hear two options. Live with it, or replace the windows. This guide covers a third path that many people never hear about until they have already priced replacements: keeping the original sash and glass and adding professionally installed window film to control heat, glare and ultraviolet light. We are Commonwealth Window Tinting, based at 317 Great Bridge Blvd Ste G in Chesapeake, and we install residential window film across Norfolk and the rest of Hampton Roads. The goal here is to give you honest, practical information, including where film is a great fit, where it is not, and what to check before anyone touches your glass.


Why Older Norfolk Homes Feel the Sun So Much

Most homes built before the 1970s were glazed with a single pane of glass in each sash. Single-pane glass lets a large share of the sun's energy straight into the room. On a south or west facing wall, that shows up as rooms that feel fine in the morning and stuffy by mid-afternoon, upstairs bedrooms that never quite cool off and a front parlor that nobody wants to sit in on a bright day. Our main goal is to provide you Window Film for Older and Historic Homes in Norfolk to Keep the Original Glass, Lose the Heat, Glare and UV.


Norfolk's older neighborhoods add their own twists. Many houses sit close to the water on the Lafayette and Elizabeth rivers or the Hague, so reflected light off the water bounces into front rooms. Tall ceilings and tall windows mean a lot of glass per room. Many homes were built before central air existed, so the duct runs that were added later do not always reach the hottest rooms well. And sunrooms and enclosed porches, which were designed to catch as much light as possible, can become the hottest and least usable rooms in the house.


Winter has its own problem. After the time change, the sun sits low in the sky for most of the day and shines straight through south facing windows, deep into rooms. That is pleasant warmth on a cold day, but it is also glare on televisions and computer screens and a long daily dose of light across antique furniture, hardwood floors and rugs.


Replace, Restore or Film? Start With the Window Itself

Before talking about film at all, it is worth being clear about something preservation professionals have said for decades. Original wood windows that are maintained and repaired often outlast replacement units. The National Park Service's guidance on weatherizing historic windows and doors makes the point that energy loss happens both through the glass and through air leaks around the sash and frame, and it recommends caulking, weatherstripping and reglazing before considering replacement. Its technical brief on repairing historic wooden windows walks through how to evaluate condition window by window.


That matters for film because film works on the glass, not the frame. Film can do a lot about heat, glare and UV coming through the pane. It does nothing about drafts at a loose meeting rail, rotted sills or missing glazing putty. In older homes, the best results usually come from a simple order of operations:


  • Repair first. Loose glass, failed putty, broken sash cords and rotted wood should be handled by a window restoration carpenter or painter before film goes on.

  • Seal air leaks. Weatherstripping and caulking address drafts that no film can touch.

  • Then film the glass. Once the sash is sound, film handles the sunlight side of the comfort problem.


When owners follow that order, they often find the house feels dramatically better without replacing a single window. We wrote about this decision in plain numbers in our post I Wish I Had Known This Before Spending $8000 on New Windows, and the same thinking applies even more strongly when the windows are original to a hundred-year-old house.


What Window Film Can Do for an Older Home

Modern residential films are very different from the dark, purple, bubbling film many people picture. For older homes, the useful categories are:


  • Clear or nearly clear ceramic and spectrally selective films that reject a meaningful share of infrared heat while keeping visible light high. From the street, these are very hard to notice, which is exactly what most owners of character homes want.

  • Light neutral films that take the edge off glare in sunrooms, home offices and television rooms while keeping the view natural.

  • UV blocking films. Quality residential films typically block about 99 percent of ultraviolet light, which is one of the main contributors to fading. Our UV protection film page explains how that works.

  • Privacy and decorative films for bathroom windows, front door sidelights and street facing ground floor rooms. Frosted and patterned options can be chosen to suit an older home's style. See our decorative window films page for examples.

  • Safety films that help hold broken glass together, which can be useful on large single panes near stairs or in rooms used by children.


Every film we propose comes with the manufacturer's published performance data, such as visible light transmission, UV rejection and total solar energy rejected. That lets you compare options using real numbers rather than vague promises. We do not quote a guaranteed energy savings figure, because results depend on the orientation of each window, shading from trees and neighboring houses, the glass, the frame and how your heating and cooling system is set up.


What Film Does Not Do, and Why That Matters

Honest expectations prevent disappointment. Window film will not stop drafts, fix a sash that rattles in the wind, make single-pane glass perform like a new insulated window in every respect or make a room dark if you choose a clear film. Film also does not make glass bulletproof or unbreakable, even in the case of security and safety films. And film will not stop fading completely, because visible light and heat also play a role in fading. It removes the largest single cause, which is ultraviolet light, and slows the rest.


If a company tells you a film will cut your power bill by a fixed percentage regardless of your house, or that film will solve a draft problem, keep asking questions. Good installers tell you what a film is measured to do and then help you decide whether that solves your actual problem.


Old Glass Needs a Careful Installer

This is where older homes are genuinely different from a newer house in Chesapeake or Virginia Beach, and where experience matters most. Before we recommend film on original glass, we look closely at several things.


Glass Condition and Edges

Old panes often have small chips, cracks or edges that were cut by hand. Glass that is already cracked or chipped at the edges is more vulnerable to stress, and any responsible film recommendation starts with checking for that damage. Window film manufacturers publish film-to-glass guidance that matches each film to glass type, size and condition, and we follow it. In some cases the right answer for a particular pane is a lighter film, a different film or no film at all.


Wavy and Seeded Glass

Original cylinder glass and crown-style glass are not perfectly flat. Film can usually be applied to these panes, but the irregular surface can affect how uniform the finished result looks up close. On rare or especially important panes, we recommend testing a sample area first so you can see the result before committing to the whole house.


Glazing Putty and Painted Wood

Film is installed using a water based slip solution and a squeegee. On a sound window that is routine. On a window with dried, cracked or missing putty, water can work its way into places it should not. That is one reason repair comes before film. Film is also trimmed slightly short of the glass edge, so the installer never needs to cut into painted wood. Many older homes were painted with lead based paint before 1978, and a film install should not involve scraping, sanding or disturbing painted surfaces. If your sashes have peeling or flaking paint, have that addressed by a qualified painter or restoration contractor before film goes on.


Divided Lites and Small Panes

A six-over-six double-hung window has twelve separate panes, each one cut, cleaned and filmed on its own. That takes more time than a single large pane, and it is part of why quotes for older homes look different. The upside is that the finished result follows the lines of the window exactly and looks intentional rather than added on.


Interior and Exterior Storm Windows

Many older Norfolk homes have exterior storm windows, and some owners have added interior storm panels. Film is normally applied to the inside surface of the primary sash, but storms change the picture. We will look at what you have and recommend where film should go, or whether the storm panels themselves are a better surface.


Historic Districts and Design Review

Norfolk has several locally designated historic districts, and properties in them generally need approval from the city's Architectural Review Board for exterior alterations. The city's Historic Districts page explains the Certificate of Appropriateness process and links to the design guidelines for each district.


Window film is applied to the interior surface of the glass and does not change the sash, trim, muntins or openings, which is a big reason many owners of older homes choose it over replacement. That said, the look from the street can still change if a film is dark or reflective. If your home is in a locally designated district, we recommend choosing a clear or very light, low reflectivity film and checking with the city's planning staff before installation if you have any doubt. We are glad to provide film samples and manufacturer specification sheets for that conversation. We are not the authority on what your district allows. The city is.


Film has another quality that preservation minded owners appreciate. It is removable. A professional can take film off later and clean the adhesive from the glass, leaving the original pane in place. Removal from fragile antique glass takes care and patience, and that is a job for an experienced installer rather than a razor blade on a Saturday afternoon.


Sunrooms and Enclosed Porches

These are usually the top priority. They were built to collect light, and on a summer afternoon they collect too much heat. A clear or light ceramic film can make them usable for more of the day without losing the bright, open feel that makes them special.


Front Parlors and Living Rooms

Street facing rooms often have the largest windows and the best furniture and rugs. UV protection is the main goal here, sometimes with a light glare reduction film on the panes that hit the television.


Upstairs Bedrooms

Heat rises and older ductwork often struggles to keep second floors cool. Films with strong infrared rejection on south and west facing bedroom windows help those rooms cool down faster in the evening.


Home Offices

Many older homes have a small room or a converted sleeping porch now used as an office. Low winter sun washes out monitors, and a light glare control film on the right panes solves the problem without blinds closed all day.


Bathrooms, Sidelights and Transoms

Frosted or patterned privacy film lets light in while blocking the view. On front door sidelights and transoms, a decorative pattern can complement the architecture rather than looking like a modern add-on.


Rooms With Art, Antiques and Heirlooms


If you own original artwork, antique wood furniture, old textiles or family photographs, UV protection is worth a serious look. Our post on window film for artwork and luxury interiors goes into more detail on protecting valuable interiors.


Single Pane Today, Double Pane Tomorrow?

Some owners plan to keep original sashes in front of the house and replace newer, non original windows at the back. Others have a mix of original single-pane windows and later double-pane units. Film choices differ by glass type. Double-pane insulated units have their own film-to-glass rules and seal warranty considerations, which we cover in suitable and unsuitable window films for double pane windows. A good plan accounts for every window type in the house rather than treating them all the same.


Choosing the Right Film: Questions to Ask

Whether you work with us or someone else, these questions help you separate a careful installer from a fast one:

  • Will you inspect each pane for cracks, chips and edge damage before recommending a film?

  • Which manufacturer's film-to-glass guidance are you following for single-pane, older glass?

  • Can I see a sample on my actual window, in daylight, before deciding?

  • What are the visible light transmission and exterior reflectivity of the film you recommend, and how will it look from the street?

  • How will you protect painted sashes, putty and woodwork during installation?

  • What warranty comes with the film, and what does it cover on a residential installation?

  • If I ever want the film removed, how is that done on old glass?

For a broader look at film categories, our types of window film page compares ceramic, spectrally selective, dyed, reflective and safety films side by side.


What the Process Looks Like

For older homes, we start with a walk-through. We go room by room, note orientation, look at glass condition, ask which rooms bother you most and why, and identify panes where a test sample makes sense. We then put together a written recommendation that lists which windows to film, which film for each and why, along with the manufacturer's performance data.


Installation day is quiet and clean. Furniture near windows is moved and covered, each pane is cleaned carefully, film is cut to size for that specific pane and applied from the inside. Most homes are done in a day or less depending on the number of panes. Afterward, film needs time to cure. Small water pockets or a slightly hazy look in the first days are normal and clear as the film dries, and curing can take longer in cooler months. Our guide to new window tint aftercare explains what to expect and how to clean filmed glass.


Is Late Fall a Good Time to Film an Older Home?

Yes, and for reasons that are easy to overlook. The low winter sun is when glare and fading are most noticeable in south facing rooms, so you can see exactly which windows cause problems. Scheduling tends to be more flexible than during the spring rush, when everyone remembers their hot rooms at the same time. And the film is in place and fully cured before next summer's heat arrives. The one tradeoff is that curing takes a bit longer in cold weather, which is a matter of patience rather than a problem.


Frequently Asked Questions

Will window film damage my old glass?

Film applied correctly to sound glass, using a film that matches the manufacturer's film-to-glass guidance, is a well established practice. The risk comes from skipping the inspection, using the wrong film on damaged or stressed panes, or rushing installation on fragile windows. That is why the inspection comes first.


Can I tell film is there from the street?

With clear and light films, most people cannot. Darker and reflective films are more visible. If the exterior look matters to you or to your historic district, choose a clear, low reflectivity film and ask to see a sample in place.


Is window film reversible?

Yes. A professional can remove film and clean the adhesive later. On antique glass, removal should be done slowly and carefully.


Will film help in winter?

Film's biggest effects are on solar heat, glare and UV, so its most noticeable benefits are in sunny conditions. Some films are designed to improve winter performance as well, and we can show you the manufacturer's data on those options. Film does not replace weatherstripping, storm windows or sash repair when drafts are the problem.


Do you work in Norfolk?

Yes. We serve Norfolk along with Chesapeake, Virginia Beach, Portsmouth, Suffolk and the rest of Hampton Roads. Learn more on our Norfolk window tinting page.

Talk to Us About Your Older Home


If you own an older home in Norfolk or anywhere in Hampton Roads and want to keep the original windows while making the house more comfortable, we would be glad to take a look. Start with our home window tinting page, call us at 757-646-6357 or reach us through our contact page.


Our shop is at 317 Great Bridge Blvd Ste G, Chesapeake, VA 23320, and we are open Monday through Saturday from 8 AM to 6 PM. We will walk the house with you, tell you plainly which windows will benefit from film and which will not, and help you keep the glass that makes your home what it is.

 
 

Recent Posts

See All
bottom of page